Honda ARX1200T3DXT3 Owner's Manual page 243

Letting your PWC sit overnight with water in
the engine, especially with more corrosive
salt water, may cause severe engine damage.
If a Honda PWC dealer is not available:
1. Change the engine oil and filter
2. Using the flushing procedure
run the engine for at least 10 minutes to
remove any moisture left in the combustion
chamber.
3. After stopping the engine, check the oil. If
it appears milky (indicating water
contamination), change the oil and filter
again.
(page 167).
(page 189),
If Your PWC Is Submerged
Taking Care of the Unexpected Taking Care of the Unexpected
235