Honda ARX1200T3DXT3 Owner's Manual page 103

Check these items which require starting and
flushing the engine on shore (see Flushing
Procedure, page 189. If necessary, these
procedures may be performed with your
PWC on calm water):
Insert the lock clip in the
Engine Start
engine stop switch.
& Stop
Push the start button after
ventilating the engine
compartment.
Stop the engine by pushing
the engine stop button. Start
the engine again and stop it
by removing the lock clip.
Check the water comes out
Engine
from the cooling water
Cooling
bypass outlet.
System
Is Your PWC Ready To Ride?
Engine Oil Check the level and add oil if
needed
Off-throttle Check that the OTS
Steering activates properly
System (OTS) 194).
(page 162).
(page
95
Before Riding