Honda ARX1200T3DXT3 Owner's Manual page 143

6. Use fresh water to rinse out the engine
compartment. Avoid spraying water on the
electrical components.
NOTICE
High pressure water (or air) can damage
certain parts of your personal watercraft.
7. Remove the bilge drain plugs to drain any
water. Raise the bow (front) of your PWC
about 1 foot to allow complete draining.
8. Wipe the engine compartment dry with
dry, clean rags.
9. Confirm the engine and the exhaust
system is cool, then spray a water-
displacement corrosion-proof lubricant
(without Teflon or molybdenum additives,
such as CRC 6-56 or equivalent) on the
engine, electrical wiring and jet pump
assembly.
Post-ride Maintenance
If you won't be riding for more than one
week, perform the following:
10.Spray a water-displacement corrosion-
proof lubricant (without Teflon or
molybdenum additives, such as CRC 6-56
or an equivalent) into the throttle body
(pages 175-176).
11.ARX1200T3DX/T3 only: Spray a water-
displacement corrosion-proof lubricant
(without Teflon or molybdenum additives
such as CRC 6-56 or equivalent) on the
outside of the turbocharger (especially the
wastegate link) (page
12.Keep your PWC as level as possible and
place a cover over it for storage. For
prolonged storage, refer to Storing Your
Honda on page 208.
Basic Operation & Riding
179).
135