If a Fuse Blows
Circuit Fuse Access:
4. To check or replace a circuit fuse, pull the
old fuse out of its retaining clips. Look for
a burned wire inside the fuse. If the fuse is
blown (4), replace it with a spare fuse (6)
of the same rating or lower.
5. Install the fuse box cover.
6. Install the rear tray
seat
(page
153).
If you do not have a spare fuse and you
cannot ride the PWC without fixing the
problem, take a fuse of the same rating or a
lower rating from one of the other circuits
that you can do without temporarily.
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of
damage to the electrical system.
228
Taking Care of the Unexpected
(page
227) and the rear
ENGINE COMPARTMENT
(6) spare fuses
(6)