Section 1 − Safety Information; Section 2 − Specifications - Miller REGENCY 250 Owner's Manual

SECTION 1 − SAFETY INFORMATION
Read all safety messages throughout this manual.
Obey all safety messages to avoid injury.
Learn the meaning of WARNING and CAUTION.
1 2
WARNING
ELECTRIC SHOCK can kill.
•
Do not touch live electrical parts.
•
Disconnect input
installing or servicing.
5
WARNING
6
NOTE
7
Specification
Type Of Output
Rated Weld Output
Type Of Input Power
Input Amperes At Rated Output
Input Amperes While Idling
KVA/KW Used At Rated Output
KVA/KW Used While Idling
Max. Open-Circuit Voltage
Welding Process
Input Power Cord
Work Cable
Overall Dimensions
Weight
CAUTION
3
4
power before
READ SAFETY BLOCKS at start of
Section 3-1 before proceeding.
Turn Off switch when using high frequency.
Figure 1-1. Safety Information
SECTION 2 − SPECIFICATIONS
Table 2-1. Welding Power Source
Constant Voltage DC
200 Amperes, 28 Volts DC At 60% Duty Cycle (See Section 2-2)
Single-Phase; 200, 230, 460, 575 Volts AC; 60 Hz
46 A At 200 V, 40 A At 230 V, 20 A At 460 V, 16 A At 575 V
1.2 A At 200 V, 1.0 A At 230 V, 0.5 A At 460 V
9.15 kVA/8.3 kW
0.244 kVA/0.134 kW
42 Volts DC
Gas Metal Arc Welding (GMAW)
8 ft (2.4 m)
10 ft (3 m)
See Figure 3-3
Net: 168 lb (76 kg); Ship: 172 lb (78 kg)
2
MOVING PARTS can injure.
•
Keep away from moving parts.
•
Keep all panels and covers closed
when operating.
Description
mod1.1 2/93
1 Safety Alert Symbol
2 Signal Word
WARNING means possible death
or serious injury can happen.
CAUTION means possible minor
injury or equipment damage can
happen.
3 Statement Of Hazard And Re-
sult
4 Safety Instructions To Avoid
Hazard
5 Hazard Symbol (If Available)
6 Safety Banner
Read safety blocks for each sym-
bol shown.
7 NOTE
Special instructions for best oper-
ation − not related to safety.
OM-293 Page 1