Turn Signal Light And Tail/Brake Light; Replacing A License Plate Light Bulb - Yamaha SUPER TENERE XT1200Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
5. Connect the headlight coupler.
6. Install the headlight bulb cover by
turning it clockwise.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
6
Turn signal light and tail/brake
light
This model is equipped with LED-type
turn signal lights and an LED-type
tail/brake light.
If a turn signal light or the tail/brake
light does not come on, have a
Yamaha dealer check it.
6-33
EAU58590
Replacing a license plate light
bulb
1. Remove the license plate light unit
bolts.
1
1. License plate light unit
2. License plate light unit bolt
2. Remove the license plate light
bulb socket (together with the
bulb) by turning it counterclock-
wise, and then pulling it out.
EAU49722
2