Yamaha SUPER TENERE XT1200Z Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
Information display
GEAR
N
TRIP-1
1 2 TRIP-2
ODO
3
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:06
1. Information display
2. Display–1
3. Display–2
4. Display–3
There are 3 information displays. The
selected information display can be
switched by pushing the select switch.
The following items are shown in the
information displays:
 an odometer display
 tripmeter displays
 a fuel reserve tripmeter display
 an estimated traveling range dis-
play
 an elapsed time display
 an air intake temperature display
 a coolant temperature display
 an average fuel consumption dis-
play
 an instantaneous fuel consump-
3
km
tion display
5.0
km 4
7.0 The items shown in each information
km
20
display can be selected.
GEAR
To set or select the items shown, see
N
page 3-16.
RANGE km
11
FUEL AVG km/L
12.3
CRNT FUEL km/L
12.3 Odometer display:
Tripmeter displays:
"TRIP-1" and "TRIP-2" show the dis-
tance traveled since they were last set
to zero.
ODO km
20
TRIP-1 km
5.0
TRIP-2 km
7.0
3-13
When approximately 3.9 L (1.03 US
gal, 0.86 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the
information display will automatically
change to the fuel reserve tripmeter
mode "TRIP-F" and start counting the
distance traveled from that point.
GEAR
4
TRIP-F km
3.4
In that case, pushing the select switch
switches the display between the vari-
ous information displays in the follow-
ing order;
TRIP-F → Display–1 → Display–2 →
Display–3 → TRIP-F
To reset a tripmeter, use the select
switch to select the information display
that contains the tripmeter. Push the