1
1. License plate light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
1
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in, and then
turning it clockwise until it stops.
PERIODIC MAINTENANCE AND ADJUSTMENT
6. Place the license plate light unit in
the original position, and then in-
stall the bolts.
6-34
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the windshield by remov-
ing the screws.
2
1. Windshield
2. Screw
2. Remove the cover by pulling it
outward.
EAU58971
1
2
6