Replacing a rear turn signal
light bulb or a tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-31.)
2. Remove the turn signal light bulb
socket (together with the bulb) or
the tail/brake light bulb socket (to-
gether with the bulb) by turning it
counterclockwise.
1. Turn signal light bulb socket
2. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Install the socket (together with
EAU27005
the bulb) by turning it clockwise.
6. Install the passenger seat.
7-36
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. License plate light unit
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
EAU24314
7