Multi-Function Meter Unit - Yamaha SUPER TENERE XT1200Z Owner's Manual

Multi-function meter unit

1 2 3 4 5 6 7
GEAR
N
A.TEMP
C.TEMP
TIME TRIP
12 11 10 9
1. "RESET" button
2. "TCS" button
3. Clock
4. Tachometer
5. Speedometer
6. Transmission gear display
7. Information display selection function
8. Information display
9. Fuel meter
10.Eco indicator "ECO"
11.Drive mode display
12.Traction control system mode display
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
INSTRUMENT AND CONTROL FUNCTIONS
settings while riding can distract the
EAU58932
operator and increase the risk of an
accident.
TIP
The select switch "
˚C
25
menu switch "MENU" are located on
˚C
Lo
the left handlebar. These switches al-
0:00
low you to control or change the set-
tings of the multi-function meter unit.
8
1. Menu switch "MENU"
2. Select switch "
The multi-function
EWA12423
equipped with the following:
 a speedometer
 a tachometer
 a clock
 a fuel meter
 an eco indicator
 a transmission gear display
 a drive mode display (which
 a traction control system mode
/ " and the
 an information display (which
 a setting mode display (which al-
1
 a self-diagnosis device
TIP
 Be sure to turn the key to "ON" be-
2
 For the UK only: To switch the me-
/ "
meter unit is
3-10
shows the selected drive mode)
display (which shows the selected
traction control system mode)
shows various information, such
as the odometer reading)
lows you to set, select, or reset the
items shown in the information
display)
fore pushing the
switch " / ", menu
"MENU", "RESET" button and
"TCS" button.
ter displays between kilometers
and miles, see page 3-16.
3
select
switch