Yamaha SUPER TENERE XT1200Z Owner's Manual page 30

INSTRUMENT AND CONTROL FUNCTIONS
GEAR
4
C.TEMP
3
TIP
The selected information display can-
not be switched while the message
"Hi" is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
12.3
The average fuel consumption display
modes "km/L", "L/100km" or "MPG"
(for the UK only) show the average fuel
consumption since the display was last
reset.
 The "km/L" display shows the av-
˚C
Hi
erage distance that can be trav-
eled on 1.0 L of fuel.
 The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
 For the UK only: The "MPG" dis-
play shows the average distance
that
1.0 Imp.gal of fuel.
ECA10022
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
km/L
SET" button again for at least 2
seconds while the display is flashing.
can be traveled on
3-15
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption dis-
play:
CRNT FUEL
12.3
The instantaneous fuel consumption
display modes "km/L", "L/100km" or
"MPG" (for the UK only) show the fuel
consumption under the current riding
conditions.
 The "km/L" display shows the dis-
tance that can be traveled on 1.0 L
of fuel.
ECA15474
km/L