Replacing A License Plate Light Bulb - Yamaha SUPER TENERE XT1200Z Owner's Manual

1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a license plate light
1
bulb
1. Remove the license plate light unit
bolts.
1
1. License plate light unit
2. License plate light unit bolt
2. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
EAU49720
2
1. License plate light bulb socket
3. Remove the burnt-out bulb by pull-
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6-33
1
ing it out.
1
bulb) by pushing it in, and then
turning it clockwise until it stops.
6