Removing And Installing Cowlings - Yamaha SUPER TENERE XT1200Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing cowl-
ings
The cowlings shown need to be re-
moved to perform some of the mainte-
nance jobs described in this chapter.
Refer to this section each time a cowl-
ing needs to be removed and installed.
1
6
1. Cowling A
2. Cowling B
EAU18781
2
1. Cowling C
Cowling A
To remove the cowling
Remove the quick fastener screws, and
then pull the cowling off as shown.
2
1. Cowling A
2. Quick fastener screw
To install the cowling
1. Fit the projections on the cowling
1
EAU49532
1. Projection
2. Matching hole
3. Cowling B
2. Install the quick fastener screws.
1
Cowling B
To remove the cowling
1. Remove cowling A.
2. Remove the bolts and the quick
2
6-8
into the matching holes in cowling
B.
1 2 3
fasteners, and then pull the cowl-
ing off.
EAU49520