Adjusting The Front Fork - Yamaha SUPER TENERE XT1200Z Owner's Manual

Adjusting the front fork

WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting screws and com-
pression damping force
screws.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load and thereby
suspension, turn the adjusting bolt on
each fork leg in direction (b).
INSTRUMENT AND CONTROL FUNCTIONS
EAU14743
1
EWA10180
1. Spring preload adjusting bolt
adjusting
Align the appropriate groove on the ad-
justing mechanism with the top of the
ECA10101
front fork cap bolt.
1. Current setting
soften the
2. Front fork cap bolt
(a)
(b)
3-28
Spring preload setting:
Minimum (soft):
8
Standard:
5.5
Maximum (hard):
0
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting screw on each
fork leg in direction (a). To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting screw on each fork leg in di-
rection (b).
1
(a)
1. Rebound damping force adjusting screw
3
(b)