Adjusting The Rider Seat Height - Yamaha SUPER TENERE XT1200Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Adjusting the rider seat height

The rider seat height can be adjusted
to one of two positions to suit the rid-
er's preference.
The rider seat height was adjusted to
3
the higher position at delivery.
1 2
1. Low position
2. High position
To change the rider seat height to
the low position
1. Remove the rider seat. (See page
3-32.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
EAU49475
1
1. Rider seat height position adjuster
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the "L" mark
as shown.
1
1. Rider seat height position adjuster
2. "L" mark
3. Match mark
3-33
4. Insert the projection on the rear of
1. Projection
2. Seat holder A (for low position)
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
3
2. Remove the rider seat height posi-
2
the rider seat into seat holder A as
shown.
1
2
3-32.)
tion adjuster by pulling it out.