Yamaha SUPER TENERE XT1200Z Owner's Manual page 23

Hide thumbs Also See for SUPER TENERE XT1200Z:
Table of Contents

Advertisement

1
2
1. Closed position
2. Cruise control cancel direction
 Apply the front or rear brake.
 Disengage the clutch.
Push the power switch to turn off the
cruise control system. The "
tor light and the "SET" indicator light
will go off.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
Using the resume function
Push the "RES+" side of the cruise
control setting switch to reactivate the
cruise control system. The traveling
INSTRUMENT AND CONTROL FUNCTIONS
speed will return to the previously set
cruising speed. The "SET" indicator
light will come on.
WARNING
It is dangerous to use the resume
function when the previously set
cruising speed is too high for current
conditions.
TIP
 The resume function operates
when riding in 3rd gear at speeds
between about 50 km/h (31 mi/h)
and 100 km/h (62 mi/h), 4th gear
" indica-
at speeds between about 50 km/h
(31 mi/h) and 150 km/h (93 mi/h),
or 5th or 6th gear at speeds be-
tween about 50 km/h (31 mi/h)
and 180 km/h (112 mi/h).
 Pushing the power switch while
the system is operating will turn
the system off completely and
erase the previously set cruising
speed. You will not be able to use
the resume function until a new
cruising speed has been set.
Automatic deactivation of the cruise
control system
The cruise control system for this mod-
EWA16351
el is electronically controlled and is
linked with the other control systems.
The cruise control system will auto-
matically become deactivated under
the following conditions:
 The cruise control system is not
 Wheel slip or wheel spin is detect-
 The start/engine stop switch is set
 The engine stalls.
 The sidestand is lowered.
When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the "
and the "SET" indicator light will flash
for 4 seconds, and then go off.
When not traveling with a set cruising
speed, if the start/engine stop switch is
set to the "
3-8
able to maintain the set cruising
speed.
ed. (If the traction control system
has not been turned off, the trac-
tion control system will work.)
to the "
" position.
" indicator light will go off
" position, the engine
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt1200zf

Table of Contents