Instrument and control functions
1 1 1
5
1. Cap
2. Rider seat lock lever
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
1 1 1
2 2
1. Projection
2. Seat holder
2. Install the cap.
2
1. Cap
3. Install the passenger seat.
TIP
Make sure that the seats are prop-
erly secured before riding.
The rider seat height can be ad-
justed. See the following section.
5-27
Adjusting the rider seat height
The rider seat height can be adjusted
1 1 1
to one of two positions.
1. Low position
2. High position
To change to the high position
1. Remove the passenger seat and
rider seat.
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
EAU92633
2
1