Yamaha SUPER TENERE XT1200Z Owner's Manual page 98

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Headlight lead
6. Remove the auxiliary light bulb
socket (together with the bulb) by
6
turning the socket counterclock-
wise.
1. Auxiliary light bulb socket
7. Remove the burnt-out bulb by
pulling it out.
1. Auxiliary light bulb
8. Insert a new bulb into the socket.
9. Install the socket (together with
the bulb) by pushing it in and turn-
ing it clockwise.
10. Install the headlight unit by install-
ing the bolts, and then tightening
them to the specified torque.
Tightening torque:
Headlight unit bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
11. Install the headlight unit cover by
1
installing the bolts.
12. Install the panel by installing the
screws and the quick fastener
screw.
13. Install the cover.
1
14. Install the windshield by installing
6-34
the screws, and then tightening
them to the specified torque.
WARNING! A loose windshield
could cause an accident. Be
sure to tighten the screws to the
specified torque.
[EWA15511]
Tightening torque:
Windshield screw:
0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)