Carrier; Sidestand - Yamaha YBR125ESD Owner's Manual

Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
1. Spring preload adjusting ring
2. Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
5
INSTRUMENT AND CONTROL FUNCTIONS

Carrier

WARNING
G Do not exceed the load limit of 3
kg (6.6 lb) for the carrier.
G
Do not exceed the maximum
load of 194 kg (428 lb) for the ve-
hicle.
1. Carrier
3-11
EAU15112

Sidestand

EWA10171 The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
(See page 3-12 for an explanation of
1
the ignition circuit cut-off system.)
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly as described
EAU15303
3
EWA10240