Helmet Holder; Shock Absorber; Carrier - Yamaha TW200E W 2007 Owner's Manual

Helmet holder

1
1. Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
INSTRUMENT AND CONTROL FUNCTIONS
EAU14281

Shock absorber

WARNING
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G Do not tamper with or attempt to
open the gas cylinder.
G
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
EWA10160
G Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
G
Always have a Yamaha dealer
service the shock absorber.
EAU15090

Carrier

EWA10220
1. Carrier
G
G
3-9
1
WARNING
Do not exceed the load limit of
3 kg (7 lb) for the carrier.
Do not exceed the maximum
load of 180 kg (397 lb) for the ve-
hicle.
EAU15110
2
3
4
EWA10170
5
6
7
8
9