Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1
1. Panel A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18771
1
1. Panel B
Panel A
To remove the panel
1. Remove the bolt.
1. Bolt
2. Pull the front of the panel out, and
EAU49090
To install the panel
1. Secure the rear of the panel, and
1
2. Install the bolt.
6-6
then slide the panel forward to re-
lease it in the rear.
then push the front of the panel in.
6