Rear brake lever
1
1. Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull the lever toward the handle-
bar grip.
This model is equipped with a unified
brake system.
When pulling the rear brake lever, the
rear brake and a portion of the front
brake are applied. For full braking per-
formance, apply both brake levers si-
multaneously.
TIP
As the unified brake system is me-
chanical, additional free play can
be felt in the front brake lever when
EAUS1963
the rear brake lever is being
pulled.
The unified brake system does not
function when the front brake is
applied alone.
Instrument and control functions
Fuel tank cap
1. Fuel tank cap
2. Match marks
To remove the fuel tank cap
1. Open the seat. (See page 3-11.)
2. Turn the fuel tank cap counter-
To install the fuel tank cap
1. Insert the fuel tank cap into the
2. Close the seat.
Make sure that the fuel tank cap is
3-8
1
2
clockwise and pull it off.
tank opening and turn it clockwise
until the "
" marks on the cap and
rubber mat are aligned.
WARNING
EAUT3591
1
2
3
4
5
6
7
8
9
10
11
EWA11092
12