Yamaha XENTER HW151 Owner's Manual page 44

Periodic maintenance and adjustment
1
Panel A
2
To remove the panel
3
4
2
5
6
1. Luggage holder
7
2. Panel A
1. Remove the luggage holder by re-
8
moving the screws.
2. Remove the screws, and then pull
9
the panel outward.
To install the panel
10
1. Place the panel in the original posi-
tion, and then install the screws.
11
2. Install the luggage holder by in-
stalling the screws, and then tight-
12
en the screws to the specified
torque.
EAUT4881
Tightening torque:
luggage holder screws:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Panel B
To remove the panel
1
Remove the screws and quick fastener,
and then take the panel off.
2
1. Panel B
2. Quick fastener
To install the panel
Place the panel in the original position,
and then install the quick fastener and
screws.
Panel C
To remove the panel
1. Open the seat. (See page 3-11.)
2. Remove the screw, and then pull
1. Panel C
1
6-9
the panel off as shown.
1