Handlebar Switches; Front Brake Lever - Yamaha XENTER HW151 Owner's Manual

Instrument and control functions
1

Handlebar switches

Left
2
1
3
4
2
5
3
6
1. Dimmer switch " /
2. Turn signal switch "
7
3. Horn switch " "
Right
8
9
10
11
12
1. Start switch " "
EAU1234H
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
"
/ "
Horn switch "
Press this switch to sound the horn.
Start switch " "
Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
1
EAU12401
/ "
" for the high
" for the low beam.
EAU12461
/ "
". To signal a left-hand
". When re-
EAU12501
"
EAUM1133
3-7

Front brake lever

1
1. Front brake lever
The front brake lever is located on the
right side of the handlebar. To apply the
front brake, pull this lever toward the
throttle grip.
This model is equipped with a unified
brake system.
As this system is mechanical, addition-
al free play can be felt in the front brake
lever when the rear brake lever is being
applied. See "Rear brake lever" for de-
tailed information on the unified brake
system.
EAUS2012