Indicator Lights And Warning Lights - Yamaha XENTER HW151 Owner's Manual

To unlock the steering
2
1
1. Turn.
2. Release.
1. Insert the key.
2. With the key in the "LOCK" posi-
tion, push the key in and turn it to
"OFF".
Instrument and control functions
Indicator lights and warning
lights
1 2 3 4 1
1. Turn signal indicator lights "
2. Coolant temperature warning light "
3. High beam indicator light "
4. Engine trouble warning light "
Turn signal indicator lights "
" "
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
3-2
EAU49398
Coolant temperature warning light
" "
This warning light comes on if the en-
gine overheats. If this occurs, stop the
engine immediately and allow the en-
gine to cool.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
" and " "
a Yamaha dealer check the electrical
"
circuit.
"
"
NOTICE
Do not continue to operate the en-
EAU11032
" and
gine if it is overheating.
TIP

For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
EAU11081
the coolant temperature in the ra-
"
diator.

If the engine overheats, see page
EAU11447
1
2
3
4
5
6
7
ECA10022
8
9
10
11
12