Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha XENTER HW151 Owner's Manual

1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the cowling.
Periodic maintenance and adjustment

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6-30
EAU24182
Replacing a front turn signal
light bulb
If a front turn signal light burns out, re-
place it as follows.
1. Remove cowling
page 6-8.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Turn signal light bulb socket
3. Remove the burnt out bulb by
pushing it in and turning it counter-
clockwise.
EAUT3652
1
2
A. (See
3
4
5
6
7
8
1
9
10
11
12