Winmate ID70 User Manual page 10

ID70 Motherboard User Manual /
Engineering Spec.
Chapter 1 General Information
1.1 Introduction
The ID70 SBC is integrated with Intel
and Atom D2550 Processor. Intel Atom Processor with 32nm low power
design enables down to 50% less average power consumption and the
chipset delivers up to 4x improvement in graphics performance and
enables up to 50% higher data transfer bus speed rate.
In peripheral connectivity, ID70 SBC features with two Mini-PCIe I/O
ports, one PCI slot, two Serial ATA connectors, six Serial Port (Three
Connector; Three Pin Header ) and Eight Hi-Speed USB 2.0
connectors(Four Connector ; Four Pin Header ) .Additionally, ID70 SBC
build-in a 12V DC-IN power adapter.
Thus, the ID70 SBC is designed to satisfy most of the applications in the
industrial computer market, such as Gaming, POS, KIOSK, Industrial
Automation, and Programmable Control System. It is a compact design to
meet the demanding performance requirements of today's business and
industrial applications.
1.2 Feature

Mini-ITX Form Factor ( 170mm x 170mm)

Supports Intel

System memory up to 4GB DDR3 800/1066, SO-DIMM

Intel NM10 Chipset
 ®
Intel Graphic Accelerator 3650 Integrated Graphics Engine.

Dual Broadcom BCM57780 GbE controller

1 x PCI, 2 x Mini PCIe, 6 x COM, 8 x USB2.0, 2 x SATA, 8 x GPIO
ports, 1 x DVI, 1 x LPT port
ID70 Motherboard User Manual
®
NM10 express chipset, 17x17mm,
®
Atom D2550 1.86GHz processor
2