Bt Led Indications - Datalogic PowerScan PBT7100 Product Reference Manual

BT LED Indications

LED Indication
Linking in progress
Low battery
Disconnected
Unlinked
BT transmission in progress
Paging
BT Reader FRU indication
BT Base Station FRU indi-
cation
Disabled indication
Battery charge in progress
Battery charge complete
Battery charge error
316
Yellow LED blinks at 2 Hz
Green LED blinks 10 times after either of the following events occur:
-After every 10th trigger pull.
-After 30 seconds of idle time.
NOTE: Low battery LED indication coincides with the low battery
beep.
LEDs off
LEDs off
Flash yellow LED at 50 Hz while transmitting.
Yellow LED blinks at the same rate as the paging beep (1 hz)
See the topic Error Codes on page
See the topic Error Codes on page
Green LED blinks once a
second while disabled
Green LED blinks once a
second while charging
Green LED stays ON when charge is complete and reader is seated
in the Base Station.
Yellow LED blinks 550mS on/1500mS off when there is a charge
error and reader is seated in the Base Station.
Behavior
317.
317.
Applies to:
Base
Reader
Station
YES YES
NO YES
YES YES
YES YES
YES YES
YES YES
NO YES
YES NO
NO YES
YES NO
YES NO
YES NO
PowerScan® PBT7100 Cordless