Getting Started
•
•
Configure Other Features
If your installation requires different programming than the standard factory default set-
tings, the following sections of this manual allow configuration of non-interface-specific
settings you might require:
General Features
LED indicators and other such universal settings.
Symbologies
These settings allow you to enable/disable symbologies, set label lengths, require check
digit, etc.
Resetting the Standard Product Defaults
If you aren't sure what programming options are in your reader, or you've changed some
options and want the factory settings restored, scan the
tings
terface to the current configuration.
The programming section lists the factory default settings for each of the menu com-
mands (indicated by shaded blocks and bold text) on the following pages.
10
USB-OEM Interface, starting on page 87
IBM 46XX Interface, starting on page 89
—
General Features includes programming for scanning, beeper and
—
Includes options concerning the barcode label types (symbologies).
barcode below. This will copy the factory configuration for the currently active in-
Factory defaults are based on the interface type. Configure the
reader for the correct interface before scanning this label.
NOTE
Standard Product Default Settings
Standard Product Default Set-
PowerScan® PBT7100 Cordless