Beep On Ascii Bel; Beep On Not On File - Datalogic PowerScan PBT7100 Product Reference Manual

RS-232/USB-Com Interfaces

Beep On ASCII BEL

When this parameter is enabled, the reader issues a beep when a <BEL> character is de-
tected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.
Beep On ASCII BEL = Disable

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
Beep On Not On File = Disable
DEFAULT
56
ENTER/EXIT PROGRAMMING MODE
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Beep On ASCII BEL = Enable
Beep On Not On File = Enable
PowerScan® PBT7100 Cordless