Before First Use - Zanussi ZOB 482 XL User Manual

Warning! Carefully obey the instructions for
electrical connections.

Before first use

Remove all packaging, both inside and outside the
oven, before using the appliance. Do not remove the
rating plate.
Caution! To open the oven door, always hold the
handle in the centre.
Setting the time
The oven only operates after time set.
When you connect the appliance to the electrical supply
or in case of a power cut, the Time function indicator
flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the
display shows the time of day set.
For time change you must not set an automatic
function (Duration
time.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
Preheating
Set an oven function and maximum temperature and run
an empty oven for 45 minutes, to burn off any residue
from the cavity surface. Accessories can become hotter
than in normal use. During this period an odour can be
emitted. This is normal. Make sure the room is well ven-
tilated.
or End ) at the same
15