Table of Contents
Advertisement
User Manual
4 – Display Mode buttons can be used to select the display mode to be shown on the main console screen:
Full View – Only the selected PC's video signal will be shown on the main screen.
PIP (Picture In Picture) View – Shows a main picture from one PC and small picture from another
PC (you can choose both the channels from the OSD Menu).
Quad View – Shows all the 4 channels in a single screen.
PAP (Picture and Picture) View – Shows a main picture on the left side and the other 3 channels
on the right side of the screen.
5 – Display Mode Menu button directly opens the OSD menu where you can choose the desired display mode
using the arrow buttons (Computer Selection buttons).
6 – Restart button to be pressed with a paperclip to hard reboot the unit.
Back Panel View
1 – Main Power Switch.
2 – DC port to connect the included power supply unit.
3 – RJ 45 I/O ports that have 2 main functions:
a) RS232 – (Input port only): allows you to control the unit through a RS232 connection using the RJ45 to
RS232 (DB9) cable.
b) Daisy Chain Port (Input and Output): connect up to 8 Quad View (No.32327) switches) switches in a
cascade configuration to control a maximum of 32 computers.
4 – Console Ports to connect the local USB Keyboard & Mouse, the DVI-D Monitors (digital only:
please don't use DVI to VGA cables or adapters on these ports) and Audio Speakers.
Port A is for the main monitor and B is for the auxiliary monitor (full screen mode only).
5 – Computer ports to connect the supplied cables (DVI-D, USB and Audio) to each PC.
6 – Reset button to restore the default factory setting. Insert a paper clip before turning the Switch on.
7 – LAN port to connect the unit to the optional remote unit (No.32328 – not included). Please refer to the manual
for No.32328 for further information.
8 – Dip Switch set that must match the same sequence set on the optional remote unit No. 32328 (not included).
Installation
The following steps explain how to realize all the connections of this KVM switch and let you fully access all of its
features. Please Note: the connection diagrams are only examples and the real connection scheme can be
different from case to case.
CONSOLE CONNECTION
Connect the local console as follow (please refer to the following picture):
1 – Local DVI-D Main Monitor
2 – Local DVI-D Secondary Monitor (Optional),
3 – Local USB Keyboard,
4 – Local USB Mouse
5 – Local Speakers
2
English
Advertisement
Table of Contents
