Daisy Chain (Cascade) Connection - Lindy 32327 User Manual

User Manual English

DAISY CHAIN (CASCADE) CONNECTION

It's possible to connect up to 8 KVM Switches in a cascade configuration through a standard Ethernet cable with
RJ45 connectors (not included).
The console USB Keyboard & Mouse must be connected to the top (Primary) Quad View KVM Switch while every
Switch in the cascade must be connected to 1 or 2 monitors where you'll be able to see the video signals of the
computers connected to each switch. Please refer to the following picture to get more details.
The result is that you'll be able to control a maximum of 32 computer from a console with a single USB
Keyboard & Mouse and from 8 to 16 displays (you can either connect only the main display or the
secondary display too to each switch) letting you monitoring all the desktops at the same time.
Please Note: The audio and USB functions are only available on the first unit
.
USB DEVICE CONNECTION
It is possible to connect two USB devices to the front panel of the switch to be shared between the connected PC
(The USB ports on the rear panel are only for Keyboard and Mouse and can't be connected to any other USB
device).
Please be sure to install the devices on each PC you want to be able to share it with by directly connecting to a free
USB port on each computer, before connecting the device to the Switch.
4