Table of Contents
Advertisement
User Manual
OSD "Information" Menu
From the main OSD menu it is possible to reach the "Information" menu by choosing the corresponding menu item
with the arrow keys and pressing Enter. This submenu will appear as follows:
Please refer to the following table for an explanation each menu item:
Menu Item
Read monitor
Upgrade firmware
Monitor model
Preferred timing
Firmware version
4) Video Mode Control
You can easily choose the video mode for the main local monitor using the Video Mode buttons on the front panel
(please refer to the front panel description).
For the PIP mode (
display please press the PIP button again and then the desired PC button (1-4) on the front panel.
It is possible to control the Video Mode also pressing the display mode menu button (
menu will be shown letting you choose the desired video mode directly with the mouse and keyboard:
In all the display modes is always possible to left click with the mouse on a screen to select a computer to be
controlled or double click to switch a pc to Full Screen Mode.
Description
Refresh the connected monitor data.
Start the firmware update procedure. To update the
firmware please contact your local LINDY Technical
support.
Display the model name of the connected monitor.
Display the native resolution of the connected monitor
Display the current firmware version
) the currently selected PC is displayed in the main screen. To switch the subordinate
11
English
). After that an OSD
Advertisement
Table of Contents
