Daisy Chain (Cascade) Control - Lindy 32327 User Manual

User Manual
Full View
To switch between the different computers connected when in Full View mode just choose the
computer from the OSD list.
PIP (Picture in Picture) View
In this mode you can easily choose the main video signal from the first OSD list and the
subordinate video signal from the second list.
In this mode you can also relocate the position of the subordinate monitor using the mouse (drag &
drop) and also change the window zoom factor using the mouse wheel.
With a double click on the subordinate monitor it's possible to swap the main and subordinate
video signal.
Quad View
To choose the active computer when in Quad View mode just select it in the OSD list.
PAP View
To switch between the small screen and the full screen double click on the desired small screen
displayed on the right side of the main monitor or use the OSD computer list.

5) Daisy Chain (cascade) Control

Please check that all the daisy chain connections are made properly referring to the installation chapter.
To select the Quad View KVM switch you wish to control in the Daisy Chain installation please press the video
mode button (
between the mains screen of all the connected switches.
Screen of the first Quad View KVM Switch
To exit the selection mode please press the video mode selection button (
) on the front panel and the virtual cursor will appear. Then you can move this cursor
Screen of the second Quad View KVM Switch
12
English
) again.