Compass Calibration Before Fly - Hubsan X4 DESIRE H502E Instruction Manual

COMPASS CALIBRATION BEFORE FLY

Compass calibration is required after the binding as instructed on the transmitter.
1.) Rotate the X4 horizontally until the " Set Compass 2" displays on the screen.
2.) Put the X4 nose down and rotate it vertically until the " Set Compass 2 "
disappears.
3.) Calibration done.
START
Do not calibrate the compass in a strong magnetic field
Do not carry ferromagnetic materials with you while calibrating the compass,
such as keys, cell phones, etc.
Rotate the quadcopter
horizontally until
"Set Compass 2"
displays
Rotate the quadcopter
vertically until
"Set Compass 2"
disappears
DONE