Calibration; Horizontal Calibration; Compass Calibration - Hubsan ZINO PRO User Manual

3.4 Calibration

3.4.1 Horizontal Calibration

If during takeoff or flight the aircraft drifts, lifts off unevenly,
perform a horizontal calibration. First, land the aircraft if it is
flying and make sure all motors come to a complete stop. The
aircraft must also be on a completely flat and horizontal surface
for the calibration to work properly. Tap the Settings cog,
followed by "Other". Select "Horizontal Calibration" and allow
the aircraft to calibrate itself. Calibration is complete when all 4
LED indicators stop flashing. Do not move the aircraft during.
O t h e r

3.4.2 Compass Calibration

When using for the first time, the compass calibration will pop
out before takeoff. Follow the instructions on your screen, rotate
the aircraft horizontally then point the aircraft nose down and
rotate it clockwise. The compass calibration message will disap-
pear once it is completed. You must complete the compass
calibration before flying the aircraft for the first time.
The compass is susceptible to interference by electronic equip-
ments, magnetic interference and metals and interference could
lead to erratic behavior and loss of control. Regular calibration
helps to keep the compass and its readings accurate. To manual-
ly calibrate the compass, tap the "Settings" cog on the upper
right hand corner of the main interface. Then select "Other"
followed by "Compass Calibration".
自 动 旋 转 屏 幕
FPV
H o r i z o n t a l C a l i b r a t i o n
C o m p a s s C a l i b r a t i o n
A P P V e r s i o n
11
是 否
打开 关闭