Compass Calibration - Hubsan ACE SE REFINED User Manual

You have to complete the binding process on APP, only when first
time using the drone or if replacing the new transmitter.
Tips:
-The binding process has been completed in the factory. Generally,
user only need to do the first 3 steps.
-Please keep the remote controller at least 1 meter away from
drone during binding process.

3.4 Compass Calibration

When using the drone for the very first time, the compass calibration
message will pop up before takeoff. Follow the instructions on your screen,
rotate the drone horizontally, then point the drone nose to ground and
rotate it clockwise. The compass calibration message will disappear once it
is completed. You must complete the compass calibration before flying the
aircraft for the first time.
The compass is susceptible to interference from other electronic devices,
resulting in abnormal flight data. Regular calibration helps to keep the
compass and its readings accurate. select "Compass Calibration" under APP
setting interface.
C o n t ro l s
T i p s :
1 . C l i c k " Re f re s h " to re f re s h t h e a i rc r a f t l i s t ,
please make sure the your mobile device and
transmitter is connected before refreshing;
2 . S e l e c t t h e a i rc r a f t a n d c o n n e c t .
S c a n a i rc r a f t
H U B S A N _ D E V I C E _ X X X X
14
Refresh
Connect