Multi-Function Display - Yamaha TENERE XT660Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Immobilizer system indicator light
" "
The electrical circuit of the indicator
light can be checked by turning the
key to "ON". The indicator light
should come on for a few seconds,
and then go off.
3
If the indicator light does not come on
initially when the key is turned to
"ON", or if the indicator light remains
on, have a Yamaha dealer check the
electrical circuit.
When the key is turned to "OFF" and
30 seconds have passed, the indica-
tor light will start flashing indicating
the immobilizer system is enabled.
After 24 hours have passed, the indi-
cator light will stop flashing, however
the immobilizer system is still ena-
bled.
The self-diagnosis
detects problems in the immobilizer
system circuits. (See 3-8 for an expla-
nation of the self-diagnosis device.)
EAU26877

Multi-function display

1. Tachometer
2. Speedometer
3. Odometer
4. Tripmeters/fuel reserve tripmeter
5. Clock
6. Fuel meter
7. "RESET" button
8. "SELECT" button
WARNING
device also
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract
the operator and increase the risk
of an accident.
EAUS1942 The multi-function display is equip-
ped with the following:
G
G
G
G
G
G
G
G
EWA12312 TIP
G
G
3-6
a speedometer (which shows the
riding speed)
a digital tachometer
shows engine r/min)
an odometer (which shows the
total distance traveled)
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled sin-
ce the bottom segment of the
fuel meter started flashing)
a clock
a fuel meter
a self-diagnosis device
Be sure to turn the key to "ON"
before using the "SELECT" and
"RESET" buttons.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and miles, push
"SELECT" and "RESET" buttons
together, then while holding the
(which
the