Adjusting The Clutch Lever Free Play - Yamaha TENERE XT660Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Adjusting the clutch lever
free play
The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch
lever free play and, if necessary,
adjust it as follows.
1. Slide the rubber cover back at
the clutch lever.
2. Loosen the locknut.
3. To increase the clutch lever free
play, turn the adjusting bolt in
direction (a). To decrease the
clutch lever free play, turn the
6
adjusting bolt in direction (b).
1. Locknut (clutch lever)
2. Clutch lever free play adjusting bolt
3. Clutch lever free play
EAU22043 TIP
If the specified clutch lever free play
could be obtained as described abo-
ve, skip steps 4–7.
4. Fully turn the adjusting bolt at the
clutch lever in direction (a) to loo-
sen the clutch cable.
5. Loosen the locknut at the crank-
case.
6. To increase the clutch lever free
play, turn the adjusting nut in
direction (a). To decrease the
clutch lever free play, turn the
adjusting nut in direction (b).
1. Locknut (crankcase)
2. Clutch lever free play adjusting nut (crank-
case)
6-20
7. Tighten the locknut at the crank-
case.
8. Tighten the locknut at the clutch
lever and then slide the rubber
cover to its original position.