Tachometer Unit - Yamaha TDM900 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
ing the "SELECT" button, and then
push the "RESET" button. If you do not
reset the fuel reserve tripmeter manual-
ly, it will reset itself automatically and
1
the display will return to "TRIP 1" after
refueling and traveling 5 km (3 mi).
2
NOTE:
After resetting the fuel reserve tripme-
3 ter, the display will return to "TRIP 1",
unless a different mode had been pre-
viously selected; in that case, the dis-
4
play automatically returns to the prior
mode.
5
Fuel gauge
The fuel gauge indicates the amount of
6
fuel in the fuel tank. The display seg-
ments of the fuel gauge disappear to-
7
wards "E" (Empty) as the fuel level
decreases. When only one segment is
8
left near "E", refuel as soon as possible.
Self-diagnosis device
9
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
odometer/tripmeter
two-digit error code (e.g., 11, 12, 13).
If the odometer/tripmeter indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the vehicle.
CAUTION:
If the odometer/tripmeter indicates
an error code, the vehicle should be
checked as soon as possible in or-
der to avoid engine damage.
will indicate a

Tachometer unit

ECA11520
1. Tachometer
2. Tachometer red zone
3. Clock
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the
tachometer needle will move to 9500
r/min and back to zero r/min in order
to test the electrical circuit.
CAUTION:
Do not operate the engine in the ta-
chometer red zone.
Red zone: 8000 r/min and above
This tachometer unit is equipped with a
3-6
1
EAU11910
2
3
ECA10030