Checking And Lubricating The Cables; Checking And Lubricating The Throttle Grip And Cable; Checking And Lubricating The Brake And Shift Pedals - Yamaha TDM900 Owner's Manual

Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
Recommended lubricant:
Engine oil
WARNING
Damage to the outer sheath may in-
terfere with proper cable operation
and will cause the inner cable to
rust. Replace a damaged cable as
soon as possible to prevent unsafe
conditions.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23100
Checking and lubricating the
throttle grip and cable
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated or
replaced at the intervals specified in the
periodic maintenance chart.
EWA10720
EAU23110
Checking and lubricating the
brake and shift pedals
The operation of the brake and shift
pedals should be checked before each
ride, and the pedal pivots should be lu-
bricated if necessary.
6-26
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
EAU23131
2
3
4
5
6
7
8
9