Yamaha TDM900 Owner's Manual page 73

1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
3. Place a new bulb into position, and
then secure it with the bulb holder.
CAUTION:
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of the
headlight bulb to keep it free from
PERIODIC MAINTENANCE AND MINOR REPAIR
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
1
Do not affix any type of tinted
G
film or stickers to the head-
light lens.
EWA10790
Do not use a headlight bulb of
G
a wattage higher than speci-
fied.
ECA10650
1
1. Do not touch the glass part of the bulb.
4. Install the bulb cover, and then
connect the coupler.
6-32
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
2
3
4
5
6
7
8
9