Operation; Hanging On / Removing The Grass Bag; Emptying The Grass Bag; Adjusting The Cut Height - FLORABEST FRM 1800 B2 Original Operation Manual

GB

Operation

Hanging On / Removing the
Grass Bag
D
1. To hang on the grass bag (4),
lift the collision guard (9) and
hang on the grass bag. Fold the
collision guard (9) onto the grass
bag (4). It holds the grass bag in
the correct position.
2. To remove the grass bag (4),
lift the collision guard (9) and
detach the grass bag. Fold the
collision guard (9) back onto the
mower housing.
Do not work with the lawn-
mower without the collision
guard or lawn box. There is
a risk of injury.
E
The level gauge (21) is located on the side
of the grass catcher (4).
Flap (21) open:
grass catcher (4) empty
Flap (21) closed:
grass catcher (4) full
The level indicator (21) works
when the device is in operation.

Emptying the Grass Bag

To empty the grass collection bag, also
use the bottom bag handle (4).

Adjusting the Cut Height

Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
24
F
1. Hold the cut height adjusting
lever (5) and guide it past the
indent to the desired cut height
setting.
2. The handle (8) may be used
to help, in order to prevent to
mower rolling away.
20 mm - Position 1
30 mm - Position 2
40 mm - Position 3
50 mm - Position 4
60 mm - Position 5
70 mm - Position 6
The correct height is around 25 – 40 mm
for a decorative lawn and around 30 – 60
mm for a used lawn.
A higher cut height should be se-
lected for the first cut of the season.
Observe the noise protection and
local regulations.

Switching On and Off

1. Connect the equipment to the
G
power supply.
2. Before switching on, ensure that
the equipment is not in contact
with any objects.
3. To switch on, press the release
button (11) on the handle at the
same time as pressing the start
lever. Release the release button
(11).
4. To switch off, release the start
lever (15).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.