General Description; Scope Of Delivery; Overview; Functional Description - FLORABEST FRM 1800 B2 Original Operation Manual

General Description

Scope of Delivery

Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn bag
- 2 wing nuts and screws for attaching
the curved handle
- 2 butterfly nuts for attaching the curved
handle
- 2 holders to attach the
connection cable
- Translation of the original instructions
for use

Overview

1 Curved handle
A
2a Butterfly nuts
2b Wing nuts
3 Lower bar
4 Grass bag
5 Cut height adjusting lever
6 Wheels
7 Lawnmower housing
8 Handle
9 Collision guard
10 Cable holder
11 Release button (not visible)
12 Power cable outlet
13 Cable strain relief
14 Power cable
15 Start lever
C
16 Screws
E
21 Level gauge
I
22 Blade screw
23 Blade
24 Motor spindle
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass bag. Addition-
ally, the equipment is height adjustable to
six levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
specifications
Electric Lawnmower ...FRM 1800 B2
Motor input power .....................1800 W
Mains voltage .................. 230 V~, 50 Hz
Idling speed ...........................3250 min
Blade width ...................Approx. 440 mm
Cut height ............................20 – 70 mm
Protection class .................................
Protection type ................................ IPX4
Weight ......................................18.5 kg
Lawn bag volume ............................. 52 l
Sound pressure specification
(L ) .................85 dB (A); K
pA
Noise level specification
measured (L )
WA
............... 94.1 dB (A); K
guaranteed ....................... 96.0 dB (A)
Vibration on the handle
(a ) ....................1.8 m/s
n
Do not exceed the maximum permitted
network impedance of 0.277 Ohms at the
electrical connection point
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
GB
-1
II
= 3 dB (A)
pA
=2.1 dB (A)
wA
; K= 1.5 m/s²
2
19