INSTALLING THE BRAKE CALIPER PISTON
EAS1SM5156
1. Clean:
• Brake caliper
• Brake caliper piston seal
• Brake caliper piston dust seal
• Brake caliper piston
Use brake fluid for cleaning.
2. Install:
• Brake caliper piston seals "1"
• Brake caliper piston dust seal "2"
EWA33DD033
WARNING
Always use new brake caliper piston seal
and brake caliper piston dust seal.
TIP
• Apply the silicone grease on the brake caliper
piston seal and brake caliper piston dust seal.
• Fit the brake caliper piston seals and brake
caliper piston dust seals onto the slot on
brake caliper correctly.
3. Install:
• Brake caliper piston "1"
TIP
Apply the brake fluid on the piston outer sur-
face.
ECA33DD047
NOTICE
• Install the piston with its side "a" facing
the brake caliper.
• Never force to insert.
1
EAS1SM5157
INSTALLING THE REAR BRAKE CALIPER
1. Install:
2. Install:
New
New
EWA13530
Proper brake hose routing is essential to in-
sure safe vehicle operation.
ECA14170
Make sure that a bend in its pipe portion "a"
is directed as shown and the brake hose
touches the projection "b" on the brake cal-
iper.
2
1
3. Install:
4. Pour brake fluid to the brake fluid reservoir
1
a
EWA13090
4-27
• Rear brake caliper
• Rear brake caliper bracket
• Rear wheel
Refer to "REAR WHEEL" on page 4-7.
• Copper washers
New
• Brake hose
• Union bolt
Brake hose union bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
WARNING
NOTICE
b
• Brake pad springs
• Brake pads
• Brake pad pin
• Brake pad pin plug
Brake pad pin
17 Nm (1.7 m·kgf, 12 ft·lbf)
Brake pad pin plug
2.5 Nm (0.25 m·kgf, 1.8 ft·lbf)
Refer to "CHECKING THE REAR BRAKE
PADS" on page 3-25.
up to the specified level.
Recommended brake fluid
DOT 4
REAR BRAKE
b
a