TROUBLESHOOTING
EAS1SM5326
The condenser is not being charged.
TIP
Before troubleshooting, remove the following part (s):
1. Seat
2. Air scoop (left)
1. Check the entire charging system's
wiring.
OK
2. Check the rectifier/regulator.
Refer to "CHECKING THE RECTI-
FIER/REGULATOR" on page 8-43.
OK
3. Check the stator coil.
Refer to "CHECKING THE STA-
TOR COIL" on page 8-43.
OK
4. Check the charging system wire
harness.
Refer to "CIRCUIT DIAGRAM" on
page 8-6.
OK
Replace the condenser.
NG
Reconnect.
NG
Replace the rectifier/regulator.
NG
Replace the stator coil.
NG
Repair or replace the wire harness.
8-8
CHARGING SYSTEM