Makita PC5001C Technical Information page 9

W
iring diagram
Wiring in Motor Housing
Fig. D-4
Pull out Field lead wires (orange and white) from the illustrated opening of Motor housing.
Field lead wire
(white)
Brush holder
Makita
logo side
Wiring in Handle
Fig. D-5
Wiring under Switch
Put Controller's lead wire and Field's
Lead wire as illustrated below.
Controller's
Lead wire (orange)
Switch Lever
Fix Field lead wires (orange, white)
with this Lead wire holder.
Terminal block
Noise suppressor
Controller's
Lead wire (black)
Field's
Lead wire
(orange)
(viewing from Handle set (R) side)
Insulated
Connector
Switch
Switch Lever
Pass Pick-up coil's lead wires (black, white) between Handle set
and Controller setting rib.
Field lead wire
(orange)
Brush holder
Wiring to Switch
(viewing from Handle set (L) side)
Controller's
Lead wire (red, or blue)
Controller
side
Handle
Pass Field lead wires (orange, white)
between Handle set and Controller setting rib.
Grip
Pick-up Coil
Switch lever side
Controller
Fix Controller's lead wires (black,
orange, red, white) with this Lead
wire holder.
P 9/ 9