Shoulder Pin - Makita PC5001C Technical Information

R
epair
CAUTION: Remove the offset diamond wheel from the machine for safety before repair/ main-
tenance in accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No. Description
1R004 Retaining ring S pliers ST-2
1R029 Bearing setting pipe 23-15.2
1R034 Bearing setting pipe 12.2
1R268 Spring pin extractor 3
1R269 Bearing Extractor
1R291 Retaining ring S & R pliers
1R350 Ring 60
[2] LUBRICATIONS
Apply Makita grease SG.No.0 to the following portions designated with the black triangle to protect parts
and product from unusual abrasion.
Description
Item No.
Gear housing complete Gear room for engaging Spiral bevel gear 11 with Spiral bevel gear 35A
4
Fig. 1
Spiral bevel gear 11
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Spiral bevel gear 11
DISASSEMBLING
(1) Disassemble Front roller as illustrated in Fig. 2.
Fig. 2
Remove Carbon brushes to remove Armature later.
Separate Front roller and Front roller holder from the machine by removing two M6x12 Hex socket head bolts.
M6x12 Hex socket head bolt
Front roller holder
Removing / Assembling Ring spring 11
Assembling Spiral bevel gear 35A to Spindle
Removing Shoulder pin 5 from Pin cap
Removing Ball bearings 608DDW and 696ZZ
Removing Retaining ring R-30 from Gear housing
Supporting Skirt complete when removing Spindle from Spiral bevel gear 35A
M7 Hex nut
Brush holder cap
Use for
Portion to lubricate
4
Carbon brush
Brush holder cap
M6x12 Hex socket head bolt
Front roller
P 2/ 9
Amount
20g