ENGLISH SPECIFICATIONS Model PC5000C PC5001C Wheel diameter 125 mm Hole diameter 22.23 mm Rated speed (n)/No load speed (n 10000 min Overall length 437 mm 479 mm Net weight 4.0 kg 5.1 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
If operating a power tool in a damp location is accessories, or storing power tools. Such unavoidable, use a residual current device preventive safety measures reduce the risk of (RCD) protected supply. Use of an RCD reduces starting the power tool accidentally. the risk of electric shock.
The rated speed of the accessory must be at 12. Never lay the power tool down until the least equal to the maximum speed marked on accessory has come to a complete stop. The the power tool. Accessories running faster than spinning accessory may grab the surface and pull their rated speed can break and fly apart.
e) Do not attach a saw chain woodcarving blade disconnect the tool from the mains supply or toothed saw blade. Such blades create ( use non metallic objects ) and avoid frequent kickback and loss of control damaging internal parts. Safety Warnings Specific for Grinding Operation: SAVE THESE INSTRUCTIONS.
push in the lock lever (B) further. To stop the tool from To level a surface, the base of the planer should be the locked position, pull the switch trigger (A) fully, then aligned with the diamond wheel. The front roller should release it.
ALWAYS USE A MAKITA OFFSET DIAMOND Dust cover adjustment WHEEL. 1. Raise Replacing dust cover's brush 2.
To install a dust cover's brush, put the outer edge of the dust cover's brush in the groove in the dust cover. When you wish to perform clean planing operation, connect a Makita vacuum cleaner to your tool as shown in the figure. OPERATION 009882 And then expand the groove.
009884 attachment for its stated purpose. If you need any assistance for more details regarding MAINTENANCE these accessories, ask your local Makita Service Center. Offset diamond wheel (Dry type) • CAUTION: Always be sure that the tool is switched off and •...